Skytsunami
Our Steel Strapping is available in a wide range of sizes and gauges to accommodate your strapping requirements. Our edge conditioned steel strapping ensures a safe, rounded edge that is problem-free during application. Our High Tensile and Heavy Duty strapping conforms to Government, Railroad and ASTM specifications and is marked in accordance with the requirements of the Association of American Railroads (AAR).

 

Regular Duty Steel Strapping

Part # Width and Gauge (in.) Nominal Break Strength (lbs.) Winding Finish Ft./Lb. Coil Weight (lbs.) Coils per Skid AVG. Weight per Skid (lbs.)
SS3815RDTE 3/8 X .0155 665 T.E. Oscillated Brown 52.29 90-100 12 840
SS3820RD 3/8 X .020 880 Oscillated Black 39.22 105-115 12 1120
SS3820RDTE 3/8 X .020 880 T.E. Oscillated Brown 39.22 90-100 12 960
SS1215RD 1/2 X .015 890 Oscillated Black 39.22 105-115 12 1150
SS1220RD 1/2 X .020 1180 Oscillated Black 29.42 105-115 12 1200
SS1223RD 1/2 X .023 1350 Oscillated Black 25.58 105-115 12 1170
SS5820RD 5/8 X .020 1470 Oscillated Black 23.53 105-115 12 1150
SS5823RD 5/8 X .023 1690 Oscillated Black 20.46 105-115 12 1140
SS3420RD 3/4 X .020 1765 Oscillated Black 19.61 105-115 12 1120
SS3420RD-P 3/4 X .020 1255 Oscillated Black Punched 19.61 105-115 12 1120
SS3423RD 3/4 X .023 2025 Oscillated Black 17.05 105-115 12 1150

*Number of coils per skid, weight of coil and skid weight vary.

 

High-Tensile (Heat Treated) Steel Strapping

 

Part # Width and Gauge (in.) Nominal Break Strength (lbs.) Winding Finish Ft./Lb. Coil Weight (lbs.) Coils per Skid AVG. Weight per Skid (lbs.)
SS1220HT 1/2 X .020 1485 Oscillated Black 29.42 105-115 12 1300
SS5820HT 5/8 X 020 1855 Oscillated Black 23.53 105-115 12 1200
SS5820HTZE 5/8 X 020 1855 Oscillated Zinc 23.53 105-115 12 1200
SS5823HT 5/8 X .023 2130 Oscillated Black 20.46 105-115 12 1150
SS3420HT 3/4 X .020 2230 Oscillated Black 19.61 105-115 12 1270
SS3422HT 3/4 X .022 2445 Oscillated Black 17.40 105-115 12 1280
SS3425HT 3/4 X .025 2770 Oscillated Black 15.69 105-115 12 1265
SS3425HTZE 3/4 X .025 2770 Oscillated Zinc 15.69 105-115 12 1110
SS3429HTRW 3/4 X .029 3205 Ribbon Black 13.30 80-100 32 2270
SS3429HT 3/4 X .029 3205 Oscillated Black 13.30 105-115 12 1250
SS11425HT 1 1/4 X .025 4620 Ribbon Black 9.41 105-115 20 2000
SS11429HT 1 1/4 X .029 5530 Ribbon Black 8.11 105-115 20 2000
SS11429HTBLU 1 1/4 X .029 5530 Ribbon Blue 8.11 105-115 20 2000
SS11429HTZE 1 1/4 X .029 5530 Ribbon Zinc 8.11 105-115 20 2000
SS11429HT-P 1 1/4 X .029 4020 Ribbon Black Punched 8.11 105-115 20 2000
SS11435HT 1 1/4 X .035 6655 Ribbon Black 6.72 120-130 20 2090
SS11444HT 1 1/4 X .044 7900 Ribbon Black 5.35 105-115 20 2150
SS244HT 2 X .044 12900 Ribbon Black 3.34 120-130 15 1850
SS11431HT 1 1/4 X .031 5620 Ribbon Black 7.59 105-115 20 1960
SS3431HT 3/4 x .031 3370 Oscillated Black 12.65 105-115 12 1220

*Number of coils per skid, weight of coil and skid weight vary.

 

Key Term Description
Coil Sizes On a standard coil of steel the inside diameter measures 16 inches, the outside diameter measures 23 inches.
High Tensile High Tensile strapping is manufactured from special analysis cold rolled steel and heat treated to provide high tensile strength and ductability. High tensile strength affords extra protection and shock resistance under all strapping conditions.
Oscillated Wound An oscillated wound coil is uniformly and tightly wound across the 2 1/2″ width of the coil.
Painted and Waxed Painted and waxed strapping provides corrosion resistance. This finish is available in Super Duty and High Tensile strap sizes and can be used in notch or crimp type seal systems. It’s primary advantage is improved tension transmission around the load corners. Waxed strapping is required for feed wheel type tensioners.
Regular Duty Regular Duty steel strapping is manufactured from cold rolled steel under rigid controls. Precise uniformity in width, gauge control and finish ensures trouble free operation with both manual and pneumatic tools.
Ribbon Wound Each layer is wound directly over the one below it so that the width of the strapping is the width of the coil.
Standard Coils Per Skid There are 12 coils per skid for oscillated wound steel. Although the number of coils per skid for Ribbon wound steel can vary, the majority of ribbon wound products contain 20 coils per skid.
Zinc painted and waxed Zinc finish strapping is waxed and has a zinc coating to provide outstanding resistance to rust. Available in a variety of Super Duty and High Tensile sizes, it has the same improved tension transmission characteristics as the painted and waxed strapping. Zinc finish protects against surface damage and scratches.


Two Piece Set-up

Definitely the most economical way to start your strapping operation.  One tool tensions and the other places the seal on the strapping for a secure fit.

Combination Tools

For increased speed and efficiency, combination tools eliminate the need for a separate tensioner and sealer.  Some require magazine loaded seals, and others eliminate the seals altogether by cutting and inter-locking the strap.

Pneumatic Tools

For maximum speed and efficiency, pneumatic tensioners and sealers are available for a variety of strap widths and thicknesses.

Strapping Dispensers

A good, heavy-duty dispenser is a must for safe, efficient strapping operation.  We have dispensers for oscillated or ribbon wound coils, with tool trays and heavy duty wheels.

Call us today to find out which tools best suit your specific needs!

1-800-765-4161


Closed Pusher-Type 
The strap is pre-threaded through the seal prior to tensioning. The overlapping flange feature provides the required strength as the tensioner pushes against the edge of the seal.


Semi-Open (Snap-On)

Used for heavy duty or high tensile, the open flange allows placement over the strap, before or after tensioning.

Open
Fast and easy to use, open seals can be placed over the strap before or after tensioning.